Contribute  :  Advanced Search  :  Directory  :  Web Resources  :  Polls  
    Mickey's RV8 Site
 Welcome to Mickey's RV8 Site
 Wed, Mar 10 2010 @ 23:35 in Switzerland

Alternator Belt Tension

   
EnginesFrom Vern Little on the Van's Air Force website:

Belt deflection is an unreliable method of tightening the belt.

Instead, use a torque wrench on the pulley nut and adjust the tension so that you get about 12 ft-lbs before the belt slips.

A loose belt can lead to under-voltage or over-voltage from the alternator. Overvoltage is caused by the regulator trying to force more output from the alternator while the belt is slipping. When the belt grabs, it puts a surge of voltage on the bus.

Please don't ask me how I found out!


Lycoming SI 1129A Accessory Drive Belt Tension

New 3/8" 11-13 ft/lbs 132-156 in/lbs
Used 3/8" 7-9 ft/lbs 84-108 in/lbs

New 1/2" 13-15 ft/lbs 156-180 in/lbs
Used 1/2" 9-11 ft/lbs 108-132in/lbs

Vern Little 9A
 

What's Related

Story Options

Alternator Belt Tension | 0 comments | Create New Account
The following comments are owned by whomever posted them. This site is not responsible for what they say.
 Copyright © 2010 Mickey's RV8 Site
 All trademarks and copyrights on this page are owned by their respective owners.
Powered By Geeklog 
Created this page in 0.08 seconds