Contributed by: Mick
This article is continued from here: http://www.rv8.ch/article.php?story=2005052416181428Here are the tabs I had welded to the muffler. Also, the bracket that will attach these mufflers to the lord mounts in the fuselage.
Here are my detailed engineering drawings.
Here is the bracket mounted to the lord mounts on the bottom of the fuselage.
Here is the installation from the side (obviously).
Here it is from the front.
Comments (0)
Mickey's RV8 Site
http://www.rv8.ch/article.php/20050810134454125